FEP/FEP Instrumentation Shielded Pairs Tray Cable
Flexible Instrumentation Shielded Pairs, 600 Volts, 200°C Dry Special Applications
- Conductor:Class B stranding per ASTM B8. Tinned, annealed copper per ASTM B33
- Insulation:Extruded fluorinated ethylene propylene (FEP)
- Twisted Pair:Conductors twisted together with a drain wire and alum/mylar shield
- Shielding:Aluminum mylar shield and drain wire is applied over the core
- Overall Jacket:Extruded fluorinated ethylene propylene (FEP)
Applications and Features:
For use as a 600 volt, Multi Pair instrumentation cable where flame retardance, Moisture/Chemical resistance, and high temperature rating is critical. Cable can be installed in free air, in raceways or direct burial. The cable is also approved for damp or dry locations as well as Class 1 Division II industrial hazardous locations per NEC 501-4(b) for (UL) Type tray cables (TC).
Temperature rating of 200°C dry for special applications. Excellent electrical properties, chemical resistance, resistance to fluids, and flame resistance. Resistant to crush, compression and deformation. Low coefficient of friction makes installation easier. Good mechanical strength. Flexible. Pairs are black and white with pair number printed on the white conductor.
Specifications:ASTM B8 Concentric-Lay-Stranded Copper ConductorsASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper WireUL 1277 Vertical Cable Tray Flame Tests (70,000 BTU/Hr)ICEA T-29-520 Flame Test (210,000 BTU/Hr)IEEE 383 Flame Test (70,000 btu)IEEE 1202/FT4 Flame Test (70,000 BTU/hr) 350kcmil and LargerRoHS-3 Complies with European Directive 2015/863VW-1 (Vertical-Wire) Flame Test
Table 1 – Weights and Measurements
|C5FP20||18||12||20||60||0.775||455||200||UL Type TC|
Table 2 – Weights and Measurements (Metric)
|C5FP20||18||12||0.51||1.52||19.69||677||200||UL Type TC|